1 year warranty on the part
Free diagnosis
Binnen Bantammerstraat 4, Amsterdam
Do you have to hold the cable at just the right angle before your Samsung starts charging, or does nothing happen at all? Then the charging port is usually the cause. At PhonePlus in Amsterdam we work it out free of charge and you hear the fixed price before we replace anything.
Samsung charging port prices per model
These are the prices for each model. Choose yours to book a time slot.
incl. VAT · A dash means we do not offer that option for that model. The model page lists every option available.
Rule things out first, replace later
A port that stops charging is surprisingly often not faulty. Lint from your pocket or bag gets pressed further in by the connector until there is a solid plug at the bottom, so the cable can no longer seat deep enough. Just as often the problem is a worn cable or adapter with bent or flattened contacts. So we test first with a cable and charger we know are good, and inspect the port under the microscope. If the port itself is done for, we replace it: on some models that is a separate flex cable, on others it is soldered to the board and becomes soldering work.
Why a Galaxy screen comes with its frame
On most Galaxy models the AMOLED panel is laminated to the metal frame at the factory, and at the edges the screen curves into the side of the phone. Separating that panel from the frame rarely survives the attempt, so we fit screen and frame as one assembly. The result is neater than a bare panel, and the water seal around the edge is rebuilt in the same step. If your model has the fingerprint reader under the display, it belongs to the new panel and you will need to register your fingers again after the repair. We do that with you before you leave.
Frequently asked questions about Samsung charging port repair
Could it be my cable or charger?
Regularly, yes. Cables fail at the strain relief and adapters deliver less current after a few years. Bring your own cable and charger along when you come by and we can compare them against a known good set on the spot. If that is where the fault is, you do not need a repair at all.
Does the port always have to be replaced?
No. If there is nothing but a plug of lint and dirt in it, we clean the port out and that is the end of it. The diagnosis is free and puts you under no obligation, so you can find out at no risk whether cleaning is all it takes.
My device reports liquid in the connector.
That warning comes from the sensor inside the port and means there is liquid or corrosion in there. Do not keep charging with a cable, because that makes the corrosion worse. Bring the device in: we clean the port out and measure whether the contacts are still sound.
How long does a charging port repair take?
On a phone it is usually a job of around 30 minutes, so while you wait. If the port is soldered to the board, it becomes workshop work and you should count on one to two working days.
We always use functional cookies, which the site needs to work. Advertising and analytics cookies are only set with your consent, so we can measure how our ads perform. Your choice is stored on this device.
Read our privacy policy